Robot Joint Actuator Solutions for Highly Integrated Robots by VAXOR-MOTOR

Finding the Right Robot Joint Actuator for Highly Integrated Robots
As robotics engineers push toward smaller, smarter, and more capable machines, the demand for a reliable robot joint actuator for highly integrated robots has grown sharply. Highly integrated robotic systems—whether dexterous hands, bionic limbs, or compact automation modules—require actuation components that pack high torque density, precision position feedback, and thermal reliability into an extremely small footprint. VAXOR-MOTOR, operating under the brand VAXOR, has positioned itself as a provider of integrated micro-actuation solutions built specifically to address this challenge, specializing in axial flux motors, cycloidal gear reducers, and non-contact encoder integration.
Why Highly Integrated Robots Demand Specialized Actuation
Highly integrated robots, such as robotic dexterous hands, face a fundamental engineering constraint: achieving human-like finger dexterity and multi-joint motion control within a limited mechanical envelope. This creates an industry pain point centered on the need for high torque density, precision, and compact footprints in micro-manipulation and high-load robotic applications. VAXOR-MOTOR addresses this pain point directly by combining axial flux motors with micro cycloidal gear reducers, achieving high torque density and rigidity in a single integrated module. The company's electromagnetic designs optimize phase imbalance to within 5%, which supports high yield and power density—critical factors for manufacturers producing joint actuators at scale.
Core Technology Platform Behind VAXOR's Micro Joint Actuators
VAXOR-MOTOR's technology platform integrates three core elements: axial flux motors, micro cycloidal gear reducers, and non-contact absolute magnetic encoders. This combination is supported by several measurable technical metrics:
- Phase imbalance controlled within 5% for ultra-micro motors, improving manufacturing yield and consistency.
- Actuator diameters ranging from Φ16mm to Φ30mm, covering a broad spectrum of robotic joint sizes.
- Gear efficiency reaching up to 75% for specific modules.
- Backlash as low as 15–20 Arcmin, which directly supports high motion accuracy in precision applications.
These metrics are achieved through a modular design architecture and optimized electromagnetic design for brushless and coreless systems, allowing VAXOR to tailor actuator modules to different load and precision requirements without redesigning the entire platform from scratch.
The Micro Joint Actuator Module Lineup
VAXOR's Micro Joint Actuator Modules are positioned as precision actuation solutions for dexterous robotic hands, highly integrated robots, and mechanical motion control—directly aligning with the needs of engineers searching for a robot joint actuator for highly integrated robots.
Φ16mm Micro Joint Module (X16S / X16L)
This module is built for precision micro-manipulation in highly integrated robotic systems. It is remarkably lightweight, with the S-version weighing as little as 24.3g and the L-version at 26.1g. Continuous stalling torque exceeds 7.1 mNm, while maximum stalling torque surpasses 16.5 mNm. The module offers integrated gear reduction in ratios of 30, 40, and 50, providing high torque within a 16mm diameter footprint. An integrated absolute magnetic encoder delivers precise position feedback, while SPI communication ensures low-latency control response. Thermal management features chassis temperature limits of 80°C, 115°C, or 145°C depending on power loss, helping prevent overheating during operation.

Φ20mm Micro Joint Module (X20S / X20L)
Designed for medium-load precision actuation in bionic and automation applications, this module delivers continuous stalling torque above 17.2 mNm and maximum stalling torque above 35.3 mNm. It supports versatile voltage operation across 12V, 24V, and 48V systems. A multi-ratio gearbox is available in 15, 30, and 50 ratios, balancing speed and torque requirements, while the assembly can reach stalling torque up to 450 mNm at ratio 50 to support high-load robotic joints. The FPC 7PIN interface simplifies integration into robotic limbs through standardized wiring for power and data.
Φ25mm Micro Joint Module (X25S-UZ / X25S-BZ)
Built for high-torque applications in industrial and medical robotics, this module uses the CAN FD protocol for robust communication in demanding industrial environments. Continuous stalling torque reaches up to 1150 mNm at ratio 50, with reduced backlash of 15 Arcmin ensuring high motion accuracy. Mechanical strength limits allow torque capacity to reach 1800 mNm in initial cold-state torque, suitable for peak load scenarios.
Φ30mm Micro Joint Module (X30S-UZ / X30S-BZ)
As the premium option for heavy-duty micro-robotic applications, this module delivers continuous stalling torque up to 1500 mNm at ratio 50 and gear efficiency up to 75% at ratio 30. CAN FD integration supports complex network architectures for multi-joint robots, while total inertia of 30.4 gcm² provides stability during high-load motion.
Platform Compatibility and Integration Support
VAXOR-MOTOR's modules support 12V, 24V, and 48V DC bus systems, offering flexibility across different robotic platforms. Openness is built into the design through SPI and CAN FD communication protocols, along with an FPC 7PIN interface (0.5mm pitch) supporting VCC, GND, CS, SCK, MOSI, MISO, and CAL (calibration) lines. This standardization simplifies the engineering work required to integrate VAXOR actuators into highly integrated robotic systems, whether for dexterous hands or multi-joint limbs.
On the service side, VAXOR-MOTOR follows a hardware provision plus technical integration support model. The company provides detailed technical specifications and test data for electric drive assemblies, covering torque, speed, and thermal data, which helps engineering teams verify performance parameters before deployment.
Proven Application in Robotic Dexterous Hands
VAXOR's actuator technology has already been applied in real-world scenarios. In robotic dexterous hand applications, X16 and X20 modules have been utilized to achieve high-integration mechanical motion control, enabling human-like finger dexterity. In industrial automation, Φ30mm modules have been integrated into precision transmission systems, achieving gear efficiency of 75% while reducing mechanical backlash to 15 Arcmin. These examples demonstrate how VAXOR's combination of axial flux motors, cycloidal reducers, and magnetic encoders translates into practical performance for engineers building highly integrated robots.

Business Model and Engagement
VAXOR-MOTOR operates on a product-based sales approach for its standardized modules across the X16, X20, X25, and X30 series. Deployment options include hardware integration using standardized FPC 7PIN interfaces or CAN FD/SPI communication protocols. After-sales support focuses on technical inquiries and discussions regarding product specifications and operational parameter ranges, giving engineering teams a direct channel for verifying whether a given module fits their highly integrated robot design.
For teams evaluating a robot joint actuator for highly integrated robots, VAXOR-MOTOR's product matrix—spanning Φ16mm to Φ30mm modules—offers a range of torque, voltage, and communication protocol options suited to dexterous hands, industrial automation, and medical robotics applications, backed by documented technical metrics on torque, efficiency, and backlash performance.
www.vaxor-motor.com
Suzhou Vaxor-motor CO.,LTD.



